Compare AST 1218 self aligning ball bearings | ||||||||
---|---|---|---|---|---|---|---|---|
D | C | e | d | r | B | ra | X2 | |
1218 | 160 mm | 30 mm | - | 90 mm | - | 30 mm | - | - |
1218 | 160 mm | 57,2 kN | - | 90 mm | - | 30 mm | - | - |
1218 | 160 mm | 56,06 kN | - | 90 mm | - | 30 mm | - | - |
1218 | 160 mm | 30 mm | - | 90 mm | - | 30 mm | - | - |
1218 | 160 mm | 56.8 kN | 0.17 | 90 mm | - | 30 mm | - | - |
1218 | 160 mm | 57 kN | - | 90 mm | - | 30 mm | - | - |
1218 | 160 mm | 52 kN | - | 90 mm | - | 30 mm | - | - |
1218 | 160 mm | 57,5 kN | 0.17 | 90 mm | 2 | 30 mm | 2 | 0.65 |
1218 | 160 mm | 30 mm | - | 90 mm | - | 30 mm | - | - |
1218 | 160,000 mm | 30,000 mm | 0.17 | 90,000 mm | - | 30,000 mm | - | - |
Max. shaft corner radius, or 45 deg. chamfer (ch1) | 0.015 |
Bore Diameter (mm) | 12,7 |
Inner Width (Bi) | 0.6200 |
Max. Shaft Shoulder Dia. Inner (Li) | 0.8 |
Ball Dia (Dw) | 0.3440 |
Ball Qty | 10 |
Outer Diameter (mm) | 42,8625 |
Static Load Rating (Cor) | 11,800 |
Outer Dia (D) | 1.6875 |
Dynamic Load Rating (Cr) | 7,700 |
AST 2203 self aligning ball bearings | J:82.6 mm; S:8.5 mm; A:45 mm; C:25.7 kN; C0:15.2 kN; L1:22.5 mm; s1:16 mm; Designation of housing:PAE207N-; Recommended tightening torque for set screw:5.5 Nm; B:32 mm; |
AST AST090 24090 plain bearings | D:300 mm; Cb min:12 mm; Mass:10.2 kg; e:0.43; B:51 mm; da max:234 mm; ra max:2.5 mm; a:59.5 mm; Ca min:10 mm; Y0:0.78; |
AST 71948AC angular contact ball bearings | L:260 mm; Bore Diameter (mm):87,3125; L2:28 mm; B:96 mm; N2:73 mm; N:48 mm; Bearing number:UCTX17-55E; L3:157 mm; Basic dynamic load rating (C):96,1 kN; A1:46 mm; |
AST RNA4924 needle roller bearings | Brand:AST; Outer Diameter (mm):125; Bearing number:AST850BM 120100; Wall Thickness (S3):2.430; Bearing Outside Diameter, Nominal(Do):125.000; Average Clearance (Cd):0.1600; OD Chamfer Length (Co):1.800; Shaft Size (ds) - 120 +0 / -0.054:120 +0 / 0.054; Bearing Type:metal with bronze; ID Chamfer Length (Ci):0.600; |
AST AST20 24IB32 plain bearings | Max. shaft corner radius, or 45 deg. chamfer (ch1):0.015; Bore Diameter (mm):12,7; Inner Width (Bi):0.6200; Max. Shaft Shoulder Dia. Inner (Li):0.8; Ball Dia (Dw):0.3440; Ball Qty:10; Outer Diameter (mm):42,8625; Static Load Rating (Cor):11,800; Outer Dia (D):1.6875; Dynamic Load Rating (Cr):7,700; |
AST AST800 2820 plain bearings | J:82.6 mm; S:8.5 mm; A:45 mm; C:25.7 kN; C0:15.2 kN; L1:22.5 mm; s1:16 mm; Designation of housing:PAE207N-; Recommended tightening torque for set screw:5.5 Nm; B:32 mm; |
AST NUP2210 EN cylindrical roller bearings | r1 min.:0,3 mm; Brand:ISB; dk:18 mm; Weight:0,02 Kg; Outer Diameter (mm):22; B:12 mm; Bearing number:GEG 10 E; Size (mm):10x22x12; Angle:18 °; d:10 mm; |
AST GE50ET-2RS plain bearings | Max. shaft corner radius, or 45 deg. chamfer (ch1):0.015; Bore Diameter (mm):12,7; Inner Width (Bi):0.6200; Max. Shaft Shoulder Dia. Inner (Li):0.8; Ball Dia (Dw):0.3440; Ball Qty:10; Outer Diameter (mm):42,8625; Static Load Rating (Cor):11,800; Outer Dia (D):1.6875; Dynamic Load Rating (Cr):7,700; |
AST 1218 self aligning ball bearings Video
Ashley ∞ (@a.s.t.1218) • Instagram photos and videos
858 Followers, 1191 Following, 1152 Posts - See Instagram photos and videos from Ashley ∞ (@a.s.t.1218)
SRAAM - Wikipedia
AST 1218 also included the requirement that the missile could be carried by aircraft that lacked the target acquisition systems of the Phantom and Lightning
AST Complex Delayed Opening 12/18 | Absentee Shawnee
AST Complex Delayed Opening 12/18. All Absentee Shawnee Tribal Complex offices in Shawnee, OK, will not be open until 1:00 PM on Monday, December 18,
Bead Bracelets AST-1218 | Rollover Glass Bead Bracelets Assorted
This necklace is made with same techniques as of rollover bracelets using hand crotchet. it has bead knob as clasp and has adjustable size to fit all. We can
AST - Chapter: 1218 - WuxiaWorld
Chapter 1218 - The Prescription for Violet Golden Bloodline? The Eldest Princess broke through. “I never thought that you would be an alchemist as well
1218Self Aligning Double RowBall Bearing | AST Bearings
1218 self aligning double row ball bearing drawings. The maximum recommended angular misalignment is 4 degrees. When the bearing is misaligned, the